Sway Bar Link Adjuster

Description

The SP Sway Bar Link Adjuster was designed to make adjusting your sway bar more precise.  This easy-to-use adjuster is made with a 1/2″ female left hand rod end with rod end reducers that make the rod end 3/8″ ID making the width .868″.  The other end is a male 3/8″ high misalignment rod end that measures .873″ wide.  There is one jam nut made out of 7075 aluminum and anodized a dark grey.  Both the turnbuckle and the jam nut have a 9/16″ hex on them so you can easily lock down the male end of the adjuster.  On the Sway Bar Link Adjuster, the female rod end does not have a jam nut on it.

• Chromoly coated turnbuckle
• 3/8″ male right hand high misalignment rod end on one end
• 1/2″ female left hand rod end with bushings to make the bore and width the same as the 3/8″ rod end
• 7075 Aluminum anodized jam nut
• Minimum length is 3.5/16″
• Maximum safe operation length of the standard link is 4-5/8″
• Standard length, +1″ long and +2″ long available